+971 4 443 0486info@nomad-lubricants.comFacebookInstagram

Products / Industrial Gear Oils

Nomad Corvus Synthetic CLP series

Nomad Corvus Synthetic CLP series

Nomad Corvus Synthetic CLP series – fully synthetic, high-performance EP/AW gear oil based on polyalphaolefins (PAO).

Nomad Corvus Synthetic CLP series are fully-synthetic gear and general lubricating oils with excellent thermal and ageing stability, very high viscosity index (shear-stable), out-standing low temperature characteristics, good cold flowing properties, very good air release, low foaming, good protection against micro pitting, good FE8 performance, zinc and silicone oil-free.

Applications

Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Nomad industrial gear oils series “Corvus” are fitted to all your industrial applications.

For the lubrication of bearings and gearboxes which are subject to high thermal loads. Suitable for lubricated-for-life applications and in gearboxes with extended drain intervals. Miscible and compatible with mineral oils. Excellent low temperature characteristics, high, shear-stable viscosity index.

Performance levels

Nomad Corvus Synthetic CLP series of oils surpass the minimum requirements of CLP-HC gear oils according to DIN 51 517, Part 3 together with DIN 51 502, ISO 6743-6 and ISO 12925-1: CKC, CKD, CKE, AISE 224,

Typical properties

PARAMETERSTEST METHODUNITNomad Corvus Synthetic CLP series
Product Name––68100150220320460680
Density at 15 °C, kg/m3ASTM D1298kg/m3848851853854860861862
Flash point Cleveland, °CASTM D92°C240250250260260300300
Kinematic viscosity at 40 °C, mm2/sASTM D445°C, mm2/s68100150220320460680
Kinematic viscosity at 100 °C, mm2/sASTM D445°C, mm2/s10,714,519,626,735,045,662,2
Viscosity IndexASTM D2270–147150150155155155160
Pour point, °CASTM D92°C-56-53-45-42-42-39-33

Typical values, not a specification. See the technical data sheet for full details.

Open PDF
Certificate